ECU Cloning

When an Engine Control Unit, or ECU, is severely damaged, most cars stop working. The ECU is the engine’s brain; generally, the car engine won’t turn over or start when the critical electronic connections stop functioning. Most dealerships only have the ability to program new ECU computers, and will not be able to repair one that has already been programmed. My Auto Solutions can transfer all data from a damaged ECU to a replacement computer at a fraction of the cost.

What is ECU Cloning?

ECU cloning is a technical process where existing engine computer information is duplicated onto a replacement ECU. The information, including the Vehicle Identification Number (VIN), allows a new computer to replace a damaged or broken unit. At My Auto Solutions, our highly experienced technicians can use a new or second hand ECU for the cloning process. With our high quality cloning services, no additional ECU programming is required before installation.

When to Clone ECU

If your car starts having engine problems, such as stalling or rough starts, it’s generally a good idea to seek ECU repairs. While the highly qualified technicians at My Auto Solutions can repair most ECU issues, severely damaged or corroded ECU, ECM, PCM, and FICM units should be cloned and replaced. Our Duluth workshop can clone damaged ECU information to a replacement computer for a fraction of dealership repair costs. Listed below are some signs that a car needs ECU cloning services:

  • Engine doesn’t turn over or start
  • Wires and circuits severely damaged
  • ECU connections severely corroded
  • ECU connections short circuit
  • Engine computer water damaged
  • Complete ECU failure

Atlanta Area ECU Cloning

Avoid expensive dealership repairs and part replacement; contact Atlanta area My Auto Solutions for all of your ECU and ECM cloning needs. Our skilled technicians can transfer all the data from a damaged ECU to a new or second hand engine computer module. We guarantee the reprogrammed new or second hand ECU can be installed with no additional programming. My Auto Solutions offers ECU cloning to customers throughout the Atlanta area in our Duluth workshop, and national customers with our convenient mail-in service.

The expert Atlanta area technicians at My Auto Solutions can clone ECU units from Audi, BMW, Buick, Cadillac, Chevy, Dodge, Ford, GMC, Honda, Infinity, Isuzu, Jeep, Jaguar, Lincoln, Mercury, Nissan, Oldmobile, Pontiac, Saab, Subaru, Volkswagen, and Volvo. For a complete list of vehicle makes and models serviced in our Duluth, Georgia workshop, call My Auto Solutions at 678-228-8422.

Clone your ECU at My Airbags in Duluth

Replace a broken or damaged ECU with a cloned engine computer from My Auto Solutions. We save our customers money with high quality remanufactured parts and innovative engineering solutions. Contact our Duluth, GA workshop at 678-228-8422. We welcome customers from Alpharetta, Smyrna, Marietta, Lawrenceville, and other metro Atlanta communities to visit us in person. We expertly clone and program ECU, ECM, PCM, and FICM units.