All posts by admin

What’s the Difference Between ABS and Traditional Braking?

Today’s vehicles are safer than ever and are equipped with some of the latest and greatest features. You can find rear view cameras, lane keep assist, traction control and several other advanced safety features.

However, all of these ultra-modern safety features hinge on a functional anti-lock braking system (ABS). Continue reading to learn more about this braking system and how it differs from traditional braking.

Anti-Locking Brake System

An anti-locking brake system (ABS) is an intuitive system designed to help prevent the wheels on your vehicle from locking when placed under heavy stress. If you slam on the brakes when driving because of an emergency situation, a traditional braking systems will grip the brake rotors too hard. This causes the wheels to lock up and makes it extremely difficult to maneuver the vehicle.

Anti-lock braking systems use a series of advanced sensors to precisely understand the situations when your brakes would lock up. Instead of locking up, ABS will pulse to keep the pads from locking onto the rotors, which allows you to maintain a level of control even in the most extreme braking situations.

Traditional Braking Systems

Traditional brakes work on a relatively simple system: you press the brake pedal and clamps bear down on the vehicle’s rotors to reduce the speed of the vehicle. In optimum driving conditions, this process happens seamlessly. However, optimum driving conditions are not always the condition.

In an emergency driving situation, traditional brakes will clamp down and lock onto the rotors. This action can hamper and even prevent you from being able to steer and maneuver the vehicle. Since the tires are not rotating, the only remaining option is to slide straight.

The Difference Between ABS and Traditional Braking

Anti-lock brakes are different from traditional brakes because of the intuitive computer system and network of brake sensors. As you drive a vehicle equipped with ABS, sensors are continually monitoring your speed and the speed at which you slow down. Anytime your vehicle stops quicker than you normally would, the sensors instantly send signals to the computer system controlling the brakes.

Instead of the brakes locking up, the sensors tell the brakes to pulse or quickly release the pressure within millisecond intervals. This instantaneous pulsing prevents the vehicle from locking and allows you to maintain control even.

This innovative system is completely different from traditional brakes, which would require to you to use the pumping method to slow the vehicle down. Anti-locking brakes are designed to work significantly better than the traditional braking system.

Schedule ABS Repair at My Air Bags Today

ABS is one of the most essential safety features on your vehicle. It’s vital all components of your ABS are working properly and communicating effectively. If your ABS isn’t working properly, you could place your safety and the safety of other drivers at risk.

The professionals at My Air Bags offer cost-effective ABS module repair, which is significantly cheaper than replacing the entire system. Contact My Air Bags today for cost-effective ABS repair.

How to Retrieve Trouble Codes without Scanners

You no longer need to rely on your mechanic or technician to let you know what’s going on with your car. If owning an on-board diagnostics (OBD) scanner is not on your list of priorities, there’s no need to worry. Almost anyone at home can troubleshoot codes manually with cars that require OBD2 or OBD1.

When a car’s dash lights appear, trouble codes are saved by your car when it realizes something is wrong. Car manufacturers make these codes easy to access for anyone, not just car techs.

It’s As Easy As 1-2-3

You will need a paperclip without plastic covering the outside, jumping wires, the repair manual, and a pen and paper. Flip your car’s ignition on and off a couple of times without cranking the engine and finish with the key in the on position.

Your car will then check for any saved trouble codes. All the lights on the dash should light up until one remains on—usually the “service engine” light. The light in this box will blink, be attentive now!

Each pulse represents a number, and a pause between represents a break to the next number that will pulse. Quick flashing will usually represent a “0”. For example: pulse, pulse, pause, flashing means “20”. Write down these codes and then check your repair manual for what it means. These often show where your odometer reading is, sometimes the code shows without even pulsing!

Alternate Methods

Alternatively, if your odometer is electronic and doesn’t use the method mentioned above, there is another way to get your code. This is where your paperclip or jumping wire comes in handy. Press the trip and reset buttons on your odometer while engaging the key in the same way mentioned above. The code should appear on the odometer reading.

Another way to read codes is to find the car’s assembly line diagnostic lead. It is almost always near the driver’s side, under the dash. The car’s manual should list where this is located if it is not there. Turn the ignition on without cranking the vehicle again. Connect the two terminals of “A” and “B” with your handy little paperclip or wire. The dash will flash with your code, as mentioned above in the same flashing, pulsing, and pausing. This method usually works best for cars that require OBD1.

Contact MAS Repair

Diagnostic trouble codes let technicians know what is wrong with your vehicle, whether it be bad sensors or faulty modules. Contact MAS Repair for services with light control modules, mileage correction, airbag module reset, climate control, ECU cloning, and much more.

MAS Repair is located in Buford, GA. Send a message online or call (678) 778-8890 to learn more about our services.

My ABS Light is on. What Does That Mean?

Anti-lock brakes help ensure that you can brake quickly without having your brakes “lock” around your wheels. If this happens when your car is traveling with too much forward momentum, it could cause your car to skid and you to lose control. They are a useful safety feature that comes standard on most modern cars.

In order to allow your tires to maintain traction with the road, your anti-lock brake system (ABS) monitors your wheels’ rotation in comparison to the speed of the car when you are braking. If the pressure you put on the brakes would cause them to make a wheel stops rotating while the car is at an unsafe speed, your antilock brake system releases a little bit of brake fluid pressure, which allows the wheel to begin turning again so it can come to a stop while maintain traction with the road. The system then continues to compare your wheel rotation and speed until you come to a stop or let your foot off the brakes.

What Triggers Your ABS Warning Light

Your ABS system constantly monitors itself when you are driving and also completes a check each time you turn the ignition on in your car.

If it detects that something is not functioning properly, it will turn on your ABS warning light in the dashboard console to make you aware that there may be a problem. While you should still be able to safely break, the issue could be causing the antilock functionality to not work, leaving you at risk for brake locking should you need to stop quickly.

What You Should Do

As the warning light does not tell you where in the ABS system the issue was detected, you will need to either troubleshoot the issue yourself or take your car to a mechanic to have the source located and fixed.

Save Money on Your Repair

At My Auto Solutions, we provide an alternative ABS repair solution to costly dealership service for people looking for an economical solution for their ABS repair. Our expert technicians can assist customers the Atlanta and Sandy Springs areas in our local workshop. We also offer a mail-in program for customers located nationwide. Fill out our online contact form to find out more about our local repair and mail-in services.

When Should I Replace the Fluids in My Car?

Proper maintenance of your car helps keep it running smoothly, extends its lifespan and prevents breakdowns and costly repairs. Maintaining proper fluid levels and replacing your fluids when necessary is one of the easiest ways to care for your car and ensure it is operating at its peak performance.

Engine Oil

Why it’s important: Your engine oil lubricates the moving pieces in your engine and helps prevent wear and tear.

Where it is: The engine oil is under your hood, usually centrally located. Look for the little circular dipstick handle to find it.

What to check: There are little marks on the dipstick that show minimum and maximum ticks. These are your guide and your oil should fall in between them, closer to the maximum. Make sure you pull out the dipstick, wipe it off and then reinsert it before reading the oil level. As you drive the fluid moves around and will give you a higher reading than is actually present.

When to change: The old 3,000 mile rule doesn’t really apply anymore, so you should check your owner’s manual for the right mileage for your specific make and model’s recommendation.

Power Steering Fluid

Why it’s important: Your power steering fluid helps you easily turn your wheel and keep your steering responsive.

Where it is: Your power steering fluid is housed in a reservoir under your hood. Normally you can visually check the reservoir just by looking at it.

What to check: If it is a little bit low, top it off and monitor the levels. The levels should not change a drastic amount. If it does, you need to have a mechanic check for a leak, as there could be a larger problem.

When to change: Refer to your car manual to be sure, but you usually shouldn’t have to flush the system and replace your power steering fluid. If you are concerned and want to refresh it just in case, every 50,000 miles is a good interval.

Coolant

Why it’s important: In addition to keeping your air conditioning working properly, coolant (aka antifreeze) also keeps your engine from overheating.

Where it is: Your coolant is located inside your radiator. You can see it by simply removing the radiator cap and looking inside.

What to check: There should be a mark on the side signifying the optimum level. If it is low you can add more of the same brand that is currently in your car.

When to change: Your coolant should be completely changed out once every 2 years.

Transmission Fluid

Why it’s important: Your transmission fluid keeps the gears in your car running correctly and protects your transmission from wear and tear.

Where it is: Your transmission fluid is located in your transmission, which varies based on whether your car is a front-wheel drive or rear-wheel drive. But, just look for the other little dipstick handle sticking out of your engine. It should be located behind or to the right of your engine oil dipstick.

What to check: Your transmission fluid should never be low. You want to check that the fluid is still of good quality. It should be red, not brown, and shouldn’t smell burned or appear overly dirty.

When to change: It should be replaced every 50,000-100,000 miles, your owner’s manual will give a recommendation specific to your vehicle’s transmission type.

Brake Fluid

Why it’s important: Your brake fluid helps amplify your braking force and transfer that force into pressure.

Where it is: The brake fluid reservoir is located under the hood on the driver’s side of the car.

What to check: You can usually check the fluid level just by looking at the reservoir. The fluid should be a golden color, not brown. If it’s brown it should be replaced. It should never be low, if it is then take your car to a mechanic.

When to change: You should change your brake fluid every 2 years, or if you see it is dirty.

Contact MAS Repair for Your Repair Needs

At My Auto Solutions, we want to help you save money on car maintenance and repair service. Maintain your fluid levels and you can avoid unnecessary repairs and costly trips to the auto shop.

However, if you do find yourself needing a repair, My Auto Solutions offers an economical alternative to dealerships with our 24-hour turnaround for re manufactured parts. Call one of our certified technicians at (678) 778-8890 or contact us online for more information.

Ways to Make Your Car Run More Efficiently

With gas prices on the rise, getting the most miles per gallon is important for people looking to fill up their gas tank less often and save money. Properly maintaining your car and driving it conservatively is vital to keeping it running efficiently and maintaining fuel economy. However, you can optimize your fuel economy simply by following a few simple rules.

Check out these easy tips from the car engine experts at MASRepair to maximize your vehicle’s efficiency and get the most out of every gallon.

Maintain Proper Tire Inflation

Tires that are under inflated increase road resistance and use more fuel. Keeping your tires inflated to the maximum recommended PSI listed in your owner’s manual can reduce fuel consumption by up to 4 percent, and also helps extend the life of your tires.

Don’t Roll Down the Windows

Having your windows down when you are traveling at high speeds reduces your car’s aerodynamics and creates drag. Keep them rolled up when traveling above 45 MPH to save fuel – even when running the air conditioning.

Get Regular Oil Changes and Tune Ups

Properly maintaining your engine with regular oil changes and tune ups helps keep it clean and fully functional. Excessive build up in your engine and dirty, old oil reduces your fuel efficiency and emits more emissions.

Drive Safely

Slowly accelerating and decelerating uses less fuel than constantly speeding up and slamming on the brakes. Driving a safe distance from the car in front of you will cut down on your need for excessive braking and lead to better fuel usage, as will driving the speed limit.

Take Care of Necessary Repairs

If your check engine light is on, there is a problem with your engine that is causing it to run less efficiently and release more emissions. Your check engine light is designed to come on when your engine detects an issue with the engine and may lead it to release more emissions than the legal limit – which is bad for the environment and your MPG.

If you have repair issues with your engine, antilock brake system or engine control unit, MAS Repair offers a convenient mail-in repair service to help you repair your vehicle’s components cost efficiently and quickly.

Customers from across the United States can send their defective auto parts to our Buford, Georgia store for remanufacturing. Once your item arrives to our workshop, it will be repaired and mailed back within 24 hours – so you can get back on the road quickly.

When Do You Need Your Alignment Checked?

Driving on rough terrain, hitting pot holes, and bumping curbs can make your wheel alignment off center and uneven. In addition to changing the way your car drives, misaligned wheels can also cause uneven wear on your tires which can shorten their lifespan and require a costly replacement sooner than should be necessary.

However, there are some tell-tale ways your vehicle can show you that the wheels have become misaligned. Check out MASRepairs list of the easiest ways to know that you need a steering wheel alignment so you can recognize them quickly before they cause you to need a new set of tires or worse – cause a life threatening accident.

Top 3 Tips for Alignment Checkups

Sign 1: You Have to Turn your Wheel to Drive Straight

Driving straight should be easy and you should be able to do so without turning the wheel at all. If you find yourself keeping the wheel at an angle all day in order to simply go straight, there is a good chance that you should have your alignment checked.

Sign 2: Your Vehicle Drives at an Angle

If you suspect that your tires are not aligned properly, take your vehicle into a large empty parking lot and slowly drive without touching the wheel. It should drive straight without any assistance from you. However, if it seems to be pulling to one side or consistently driving at an angle that is a sign that one or two of your wheels are not in alignment with the others.

Sign 3: Uneven Tire Wear

While more difficult to diagnose as only an alignment problem, uneven tire wear can also be a sign that your tires are not in alignment. If the tread is worn off of one side of your tire but not the others, that could be due to steering wheel alignment issues – or alignment issues coupled with other issues. You should take your vehicle to an auto body shop to have the alignment checked.

Recognizing Alignment Issues Can Save You Money

Uneven wear and tear on your tires can cause you to need to replace them much sooner than you would if your car maintained proper wheel alignment. Buying a new set of tires could run you anywhere from $100-$500 depending on the number of tires that need replacing. However, checking for proper alignment, and having your wheels realigned when necessary, usually only costs $60-$100 – which saves you a lot of money in the long run!

Here at MAS Repair, we love to help our customers save money on their car maintenance and repair problems. That’s why we offer an economical and convenient repair and refurbishment service for broken or malfunctioning vehicle control units from our Buford workshop.

Save money on your vehicle control unit repairs and get your car safely back on the road at a fraction of the price of what it would cost at expensive dealerships and auto body shops. Learn more about our repair service and contact us for more information.

Online Seat Belt Repair with MAS Repair

Seat belts save thousands of lives each year. If you are involved in an accident, a functioning seat belt can protect you and your passengers from serious injuries incurred from hitting the dashboard, steering wheel, windshield, or even being ejected from the vehicle. In addition to safety reasons, many states have seat belt laws that could lead to you getting pulled over or issued a ticket due to seatbelts that are broken or not functioning properly.

Fix your seatbelt issues to ensure the safety of all your passengers using MAS Repair’s fast and convenient mail-in repair service. We can repair worn webbing, tension issues, broken buckles and more with a speedy 24-hour turnaround from the time your defective part reaches our Atlanta-area workshop.

How Mail-In Seat Belt Repair Works

Our online mail-in seat belt repair service is designed to be as easy and fast as possible to help you get back on the road quickly and economically. Here’s how it works:
1. Isolate the problem with your seat belts and take note of any broken pieces, worn webbing or tension issues.
2. Create an auto part repair request online on our website.
3. Print out your auto repair request confirmation.
4. Make sure to list your name, phone number, and return address.
5. Remove your seatbelt from your vehicle to prepare it for mailing.
6. Ship your item to us for repair at the following address:

MAS – My Auto Solutions
1707 Enterprise Dr
Buford, GA 30518

7. Once your package reaches us, we will repair or refurbish your seat belt and have it back in the mail within 24 hours.

Contact Us

If you have questions about our seatbelt repair services or need help removing your seatbelt, fill out our online contact form. Our expert technicians have years of experience dealing with seat belt repairs and will be able to help you complete your seat belt repair for a fraction of the cost of expensive dealerships and auto body shops.

Safety Tips While You’re Waiting for Refrigerator Repair

Your refrigerator and freezer keep your food fresh and safe to eat. If they break down it can not only be an inconvenience but also pose some serious safety risks to your family due to the possibility of your food spoiling. When kept at temperatures higher than 40 degrees Fahrenheit, many foods can become a breeding ground for bacteria and food borne illnesses. However, throwing all of your cold and frozen foods away due to a broken appliance is costly and wasteful.

If you are waiting on a refrigerator repair, use these handy tips for determining the safety of the food in your fridge and freezer to keep your family -and your grocery budget – protected.

When to Worry About Food Safety

If your fridge or freezer just stopped working and you notice immediately, take note of the temperature. Your fridge should be below 40 degrees and your freezer should be colder than 30 degrees. If you keep them both closed with the doors tightly sealed the temperature should hold steady for around 4 hours. If you can get the issue repaired within that time frame, then you should have no concerns about the safety of your food. Everything should have remained at a safe temperature.

However, if your repair takes longer than 4 hours, or you did not notice the issue until your fridge or freezer had already gotten warmer than 40 degrees, there is the possibility that some of the food will need to be discarded because it is potentially unsafe to eat. This is especially true if your food was allowed to be over 40 degrees for more than 2 hours, as bacteria had time to grow to hazardous levels before the food was returned to a safe temperature.

Whether or not a particular food item is safe to eat depends on whether it was refrigerated or frozen and what type of food it is.

Refrigerated Food

If the inside of your refrigerator remained cooled than 40 degrees, your food should be perfectly safe to eat. However, if your fridge became warmer than 40 degrees for a time longer than 2 hours, refer to this list to determine which foods you should keep and which foods you should throw out.

Refrigerated Foods to Keep

• Hard or processed cheese
• Margarine
• Fruit Juice
• Fresh Whole Fruits
• Open Condiments (except fish or oyster sauce)
• Breads, cakes, waffles, bagels
• Fresh whole vegetables, herbs and spices
• Fruit Pies

Refrigerated Foods to Discard

• Prepared foods
• Leftovers
• Raw or cooked meat
• Lunch meat
• Pizza
• Soft or shredded cheese
• Milk products
• Baby formula
• Eggs
• Dairy-based desserts
• Cut fruit
• Cookie dough, refrigerated rolls or biscuits
• Cream-based sauces and dressings

Frozen Food

If your freezer is full, your food should be safe for at least 48 hours as long as the door remains shut. If it is half full then it should remain safe for 24 hours. In general, frozen food should remain safe as long as it still has ice crystals and maintains a temperature of 40 degrees or below. If those conditions are met, you can refreeze the food with no safety concerns. If not, refer to this list about what foods are safe to keep and what should be thrown out.

Frozen Foods Safe to Refreeze

• Fruit juices
• Hard cheese
• Packaged fruit
• Bread products, rolls, muffins
• Pie crusts
• Waffles, pancakes, bagels
• Flour, nuts, dry goods

Frozen Foods to Discard

• Meat and seafood
• Dairy products
• Eggs
• Vegetable juice
• Packaged vegetables
• Dairy Desserts
• Casseroles
• Frozen meals

Refrigerator and Freezer Repair Services

MAS – Electronics offers repair services for many brands of refrigerators and freezers. Our Buford-based repair shop provides quality repairs with a 24-hour turnaround time and lifetime warranty. We also offer a convenient mail-in service to repair broken parts. Contact MAS – Electronics or all of your appliance repair needs by calling (678) 778-8890.

Car Maintenance 101

Keep Your Car Running with These 10 Simple Tricks 

Keeping your car running smoothly requires proper maintenance and care from the first day you have it. Maintenance is all about proactively addressing your car’s needs before any issue arises or repair is needed. It is incredibly important for safety and extends the life of your vehicle.

However, it does not have to be complicated! Check out MAS Repairs list of 10 simple tricks to keep your car running and see how simple basic car maintenance can be.

1. Check Your Tire Pressure

Maintaining tire pressure is important for fuel economy, comfort and helps reduce wear and tear on your tires. Check once every one to two weeks to ensure that your tires are at correct pressure. You can find what the correct tire pressure is by looking in your owner’s manual.

 2. Change Your Oil

Your car’s motor oil lubricates the moving parts in your engine and helps keep it clean. You should have the oil changed every 4,000 to 5,000 miles or once every three months, whichever comes first.

3. Test Your Lights

Once a month, take time to test all of your external and internal lights including headlights, blinkers, and brake lights. A light that does not come on may be burned out and need to be replaced, or it could be a symptom of a wiring or battery problem.

4. Check Tire Tread

As your tires wear, the tread on them can become too thin to provide adequate traction with the road- which is a serious safety concern.

If your tires have started to look bare, it’s time to invest in a set of new tires.

5. Monitor Fluid Levels

Checking your fluid levels to ensure that you have no leaks and to maintain optimum levels is easiest completed each time you change the oil in your car. Look at the power steering fluid, brake fluid and coolant and top off when necessary.

6. Keep it Clean

Dirt and grime on your car’s finish is not only unsightly, it can also damage the finish which can lead to rust. Regularly washing your car and removing all the mud, bird droppings, and bugs will keep it looking nice now and for years to come.

7. Rotate Your Tires

Depending on whether your car is front wheel drive or all wheel drive, your tires will wear in very predictable ways. You can extend the life of them by rotating them once every 5,000 – 8,000 miles to help them wear in a more even manner.

8. Replace Your Filters

Every 15,000 miles you should check your engine and cabin air filters to ensure they haven’t become clogged. Dirty air filters can affect the performance of your engine and climate control system. If you drive in heavy traffic or dusty conditions often, one or both of your air filters may need to be replaced.

9. Inspect Your Belts

A series of rubber belts in your car engine are responsible for driving many of your vehicle’s core systems such as the alternator and the power steering. Over time, they can start to show wear and tear and become stretched out or otherwise compromised. Consult your vehicle manual for a precise timing schedule for when you should check your belts, as it differs from one manufacturer to another.

 10. Align Your Wheels

If you find your car pulling in a certain direction when you aren’t touching the wheel or having to turn the wheel to drive straight, your tires may be out of alignment. This can be caused by sitting potholes or driving on particularly rough roads and can lead to unusual wear patterns on your tires. Most repair centers can realign your wheels for you and get you back driving on the straight and narrow.

Keeping Your Car Running Great with MAS Repair

Even with the best of maintenance, your car will most likely still need some repairs eventually. When that time comes, don’t over pay at expensive dealerships or overpriced service centers. Contact us at MAS Repair’s Buford shop for quality help you can trust.

Every part repaired by our technicians is covered by our Lifetime Warranty and 100% money-back guarantee. Plus, we repair, test and have restored auto parts ready to go within 24 hours of receiving them.

Start your repair today! Call our expert MAS Repair technicians at 678-778-8890.

How to Store Your Car Safely for the Winter

Whether it’s a Sunday-driver, a vintage beauty, or an everyday commute vehicle – many people make the decision to store their car for the winter in order to keep it in top shape while they are not using it.

However, properly storing your vehicle for any time of extended disuse is very important. You don’t want to just park it in the garage and cover it. Months of neglect can leave you with some less than pleasant surprises when you uncover your vehicle in the spring, such as maintenance issues, aesthetic problems, or even a rodent infestation.

The auto experts at MASRepair know how much you love your car and want to protect it – even when you aren’t using it. So, we have compiled a list of essential steps that every vehicle owner planning on storing their car for the winter should follow to ensure their car remains in great shape all winter long.

Handle Any Necessary Repairs

You probably don’t want to get your car out of storage next spring and suddenly remember that you have a bunch of repairs to make before you can get it back on the road. Whether your ABS light is on, your AC isn’t working as well as it should, or your lights are malfunctioning – you should get this all fixed before storing your vehicle.

We can help you take care of all your electronic systems repairs quickly and conveniently whether you are located in the Atlanta-area or nationwide. Learn more about our convenient mail-in service to take care of all your repairs for much less than traditional repair shops and dealerships.

Top Off Fluids

Get your vehicle’s oil changed and have the fluids checked to ensure you don’t have a leak that could drain your levels if left untreated for an extended period of time. You should also consider putting a fuel stabilizer into your gas tank to help prevent corrosion in your fuel lines and tank.

Adjust Tire Pressure

Many tires can slowly lose pressure over time – especially with changing environmental temperatures. A flat tire can put pressure on your rim and even bend your wheel over time. Before storing your vehicle, it’s important to check for leaks and inflate your tires to the highest recommended inflation listed on the side of the tire.

Clean it Out

Remove any trash and miscellaneous items from your vehicle and have the interior detailed and polished. If you steam clean the carpets, ensure you give it adequate time to dry before storing the vehicle as trapped accumulated moisture could lead to mildew and mold issues over time. It’s also a good idea to purchase a few packs of desiccant to place on the floorboards so they can absorb any moisture that may become trapped – just in case.

Protect it Against Infestation

In the colder months, mice rats and other small areas may seek shelter in your vehicle and cause damage to seats, electrical components, and engine systems. Place a sock loosely in the tail pipe of your vehicle to prevent animals from crawling up there. You will need to be sure you remove this before turning the vehicle on when you take it out of storage, so leave yourself a note taped to the ignition.

It’s also helpful to stuff dryer sheets in the crevices of your seats to make them less appealing for small animals to burrow and nest in. They won’t like the smell and are more likely to stay away.

Cover it Up

Choose a high-quality car cover that is waterproof and fitted so it won’t be easily blown off. If you store your car regularly, think about investing in a model specific cover from your dealer as the extra-protection and enhanced fit it provides may be worth the extra cost.

Get More Help from MASRepair.com

If you have a specific car repair question or are looking for help repairing an issue with your vehicle’s control system, contact us about our convenient and economical mail-in repair service.

We offer fast 24-hour turnaround times for auto parts repair at a fraction of the cost of traditional auto body shops and dealerships. Contact us to learn more.